How to solve the sliding of the vacuum cover of the vacuum vulcanization machine?

The sliding of the vacuum hood may be caused by the following reasons:

1. Poor sealing of the vacuum cover: Poor sealing of the vacuum cover can lead to a decrease in vacuum degree, which affects the vulcanization effect and also causes the vacuum cover to slide down. You can check whether the sealing ring is aging or damaged, whether there are foreign objects stuck at the sealing area, and replace or clean it in a timely manner.

Airgel Vacuum Heat Press

2. Insufficient lubrication: The sliding of the vacuum cover requires the support of lubricant. If the lubrication is insufficient, it can cause the vacuum cover to slide smoothly or get stuck. You can check whether the lubricating oil is sufficient and whether the lubricating parts are clean, and add lubricating oil or clean the lubricating parts in a timely manner.

3. Cylinder malfunction: The sliding of the vacuum hood is controlled by the cylinder. If the cylinder malfunctions, it can cause the vacuum hood to slide smoothly or get stuck. You can check if the cylinder is damaged or stuck, and replace or repair the cylinder in a timely manner.

4. Mechanical structure failure: The sliding of the vacuum cover may also be caused by mechanical structure failure, such as damage or wear to parts such as guide rails and bearings. It is possible to check whether the mechanical structure is normal and replace or repair damaged parts in a timely manner.